GLC-BX-D - Cisco 1000BASE-BX Single-mode Fibre 10km 1490nm LC Connector SFP Bi-directional Transceiver Module
Availabilty: In stock
New
Seeking a large quantity of GLC-BX-D, or have a target price in mind? Contact us at (855) 483-7810 or simply Request a Bulk Quote. Our sales team will promptly respond with a discounted price tailored to your needs.
PAYMENT
Cisco GLC-BX-D network transceiver module Fiber optic 1000 Mbit/s 1490 nm
1000BASE-BX10-D downstream bidirectional single fiber, DOM, SMF, 1490-nm TX/1310-nm RX wavelength
- Fiber optic 1000 Mbit/s
- Wavelength: 1490 nm
- Hot-swap
- Power consumption (typical): 1.5 W
About Cisco GLC-BX-D, Fiber optic, 1000 Mbit/s, 10000 m, 1490 nm, 1480 nm, 1500 nm
Cisco GLC-BX-D. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1000 Mbit/s, Maximum transfer distance: 10000 m. Product colour: Stainless steel, Safety: Laser Class I 21CFR1040 LN#50 7/2001, Laser Class I IEC 60825-1. Power consumption (typical): 1.5 W. Width: 13.4 mm, Depth: 56.5 mm, Height: 8.5 mm
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.1000BASE-BX10-D and 1000BASE-BX10-U SFP for Single-Fiber Bidirectional Applications
The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.
A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. Note in Figure 3 the presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1490-nm light paths.
The GLC-BX-D and GLC-BX-U SFPs also support digital optical monitoring (DOM) functions according to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Top reasons to buy GLC-BX-D Cisco from us
100% Low Price Guarantee
We provide high-quality products at low wholesale prices.
What is the lowest price of the Cisco GLC-BX-D?
Our lowest price for GLC-BX-D is $379.00, Buy Now.
Check more lowest price of Transceiver and Cisco .
























