N77-AC-3KW - Cisco 3000-Watts AC 80 Plus Platinum Hot Swap Redundant Power Supply for Nexus 7700

About Cisco N77-AC-3KW, Power supply, Grey, Ul/CSA/IEC/EN 60950-1, AS/NZS 60950, Cisco Nexus 7000, 3000 W, 85 - 264 V

Cisco N77-AC-3KW. Product type: Power supply, Product colour: Grey, Safety: Ul/CSA/IEC/EN 60950-1, AS/NZS 60950. Compatibility: Cisco Nexus 7000. Total power: 3000 W, AC input voltage: 85 - 264 V, AC input frequency: 47 - 63 Hz. Width: 100 mm, Depth: 559 mm, Height: 41 mm

The Cisco Nexus® 7700 platform switches are the latest extension to the modular Cisco Nexus 7000 Series Switches. The Cisco Nexus 7700 switches have operational and feature consistency with the existing Cisco Nexus 7000 Series Switches, using a common system architecture, the same application-specific integrated circuit (ASIC) technology, and the same proven Cisco® NX-OS Software releases.

The Cisco Nexus 7700 AC and DC power supply modules deliver fault tolerance, high efficiency, load sharing, and hot-swappable power features to the Cisco Nexus 7700 switches. The Cisco Nexus 7700 switches use 3.0-kilowatt (kW) power supplies that are 90 percent efficient or greater, so less power is dissipated as heat, and more power is available to the system to use than with typical power supplies. The high-efficiency 3.0-kW power supplies allow a smaller power configuration and provide flexible power provisioning.

The maximum output for the 3.0-kW AC power supplies is 1400 or 3000 watts (W) if input power is 110 or 220 VAC respectively, and the dual input 3.0-kW DC power scale is 1500 or 3000W if one or two inputs respectively are active. Both the AC and DC versions support multiple system-level redundancy options for greater availability. Designed to address high-availability requirements, the power supplies incorporate internal component-level monitoring, temperature sensors, and intelligent remote-management capabilities.

The power supplies are fully hot swappable, helping ensure no system interruption during installation or upgrades. They are fitted at the bottom front of the Cisco Nexus 7700 chassis, allowing installation and removal without disturbing the network cabling of the I/O modules.