210-AGZL - Dell PowerSwitch S6100-ON Modular TOR Switch

Dell 210-AGZL is the S6100-ON 2U modular Top-of-Rack switch chassis (empty slot) supporting 10/25/40/50/100GbE via interchangeable I/O modules.

The Dell 210-AGZL is the manufacturer part number for the Dell EMC/PowerSwitch Networking S6100-ON, a high-density, modular 2U Top-of-Rack (TOR) open networking switch built for data center spine and leaf deployments. This SKU represents the base chassis configuration with an empty I/O module bay (no line cards pre-installed) plus two fixed 1/10GbE SFP+ uplink ports. The chassis accepts up to four field-replaceable I/O modules, letting customers mix and match 40GbE QSFP+, 100GbE QSFP28, or CXP module types to scale from 10GbE up to 100GbE per port as needed. It runs Dell Networking OS9 (or ONIE-based OS10) and delivers Layer 3 switching with a 6.4Tbps switching fabric, making it suitable for enterprises and service providers building scalable, high-throughput leaf/spine or top-of-rack fabrics.

• Modular chassis design supporting mix-and-match I/O module types
• Supports 10/25/40/50/100GbE port speeds via interchangeable modules
• Two fixed 1/10GbE SFP+ uplink ports on the base chassis
• Redundant, hot-swappable AC power supplies for high availability
• Non-blocking 6.4Tbps switching fabric for high-throughput workloads
• Layer 2/Layer 3 managed switching with advanced routing protocol support
• Low-latency architecture optimized for spine-leaf data center fabrics
• Open Network Install Environment (ONIE) support for OS flexibility
• Scalable design allows future port and bandwidth expansion without chassis replacement
• Front-to-back or reverse airflow cooling options for varied rack layouts
• High MAC address and routing table capacity for large-scale networks
• 2U compact rack form factor maximizing rack density

Designed for scalable, high-throughput top-of-rack and spine-leaf data center networking.

• Top-of-rack switching in enterprise and hyperscale data centers
• Spine or leaf switch role in leaf-spine network fabrics
• High-density server aggregation requiring flexible 10/25/40/50/100GbE uplinks
• Data center interconnect requiring modular scalability
• Cloud and virtualization environments needing high east-west bandwidth
• Storage networking environments requiring low-latency, high-throughput switching
• Enterprises upgrading legacy 10GbE infrastructure to 25/40/100GbE incrementally

• Flexible module-based port scaling
• High 6.4Tbps non-blocking switching capacity
• Low L2/L3 latency for demanding workloads
• Redundant power for continuous uptime
• Future-proof multi-speed Ethernet support
• Space-efficient 2U rack-mountable design

• Form Factor: 2U rack-mountable chassis
• Weight: Approx. 20 kg with modules installed
• Cooling: Redundant hot-swappable fan modules with selectable airflow direction
• Rack Mounting: ReadyRails support for 4-post rack installation

Per available documentation and reseller/distributor listings, this base chassis is validated for use with:

• Dell 16x QSFP+ 40GbE I/O modules
• Dell 8x QSFP28 100GbE I/O modules
• Dell 4x CXP + 4x QSFP28 combination I/O modules
• Dell EMC S6100-ON hot-swappable AC power supply units
• Dell EMC S6100-ON redundant fan modules
• Dell ReadyRails rack mounting kits
• Dell Networking OS9 software licensing
• ONIE-compatible third-party network operating systems (e.g., OS10)

Note: Module and power supply compatibility should be confirmed against the specific S6100-ON hardware revision, as some accessories (e.g., PSU airflow direction) must match chassis airflow configuration.

• Dell PowerSwitch S6100-ON base chassis (empty I/O slot configuration)
• Two fixed SFP+ port bays (pre-installed)
• Rack mounting brackets/rails (per reseller listings)
• Power supply unit(s) as configured at time of purchase
• Documentation/warranty information (varies by reseller)

Q: What product does Dell part number 210-AGZL correspond to?

A: 210-AGZL maps to the Dell EMC/PowerSwitch Networking S6100-ON, a modular 2U Top-of-Rack switch, specifically the base chassis configuration with an empty I/O module slot, confirmed across multiple reseller listings.

Q: Does 210-AGZL include I/O modules by default?

A: No. Distributor listings identify this SKU as an 'EMPTY SLOT' configuration, meaning I/O modules (40GbE, 100GbE, or CXP) are sold and installed separately.

Q: What is the switching capacity of the S6100-ON?

A: According to the official Dell spec sheet and third-party technical listings, the S6100-ON provides a switching I/O bandwidth of 6.4 Tbps with forwarding capacity of up to 4400 Mpps in full duplex.

Q: What port speeds does the S6100-ON support?

A: The switch supports flexible 10/25/40/50/100GbE configurations depending on which I/O modules are installed in its four module bays, alongside two fixed SFP+ ports.

Q: Does the S6100-ON support PoE?

A: No, per reseller documentation the S6100-ON does not support Power over Ethernet, making it suited for data center rather than PoE endpoint deployments.

Q: What operating temperature range does this switch support?

A: The Dell installation guide specifies an environmental temperature range of 0° to 45°C, with a standard switch operating ambient range of 10° to 35°C.

Q: What operating system does the S6100-ON run?

A: The switch runs Dell Networking OS9 and is ONIE-enabled, allowing compatibility with alternative network operating systems such as OS10.

Q: Is 210-AGZL still available for purchase?

A: Yes, multiple current reseller and distributor listings show 210-AGZL as an in-stock, purchasable configuration of the S6100-ON, though availability may include refurbished units.