210-AJIV - Dell EMC N1148P-ON 48-Port PoE+ Switch

Dell EMC PowerSwitch N1148P-ON: 48-port Gigabit Layer 2 managed switch with 24 PoE+ ports, 4x 10GbE SFP+ uplinks, and stacking support.

The Dell EMC 210-AJIV is the Manufacturer Part Number for the Dell EMC PowerSwitch N1148P-ON, a Layer 2 managed Gigabit Ethernet switch from the N1100 Series. It provides 48 x 10/100/1000Base-T ports, of which 24 support PoE/PoE+ with a 375W power budget, plus 4 integrated 10GbE SFP+ uplink ports for high-speed stacking or aggregation. Built on Dell EMC Networking OS 6 and supporting the Open Network Install Environment (ONIE), the switch is designed for simplified deployment, configuration, and management, with a common CLI/GUI and interoperability with Cisco RPVST+ and CDP. It offers a 176Gbps switching fabric, variable-speed fan cooling, and stacking of up to four units for high-density, high-availability access-layer deployments in wiring closets, IDFs, and MDFs. Typical use cases include campus access switching, PoE-powered device aggregation (APs, IP phones, cameras), and small-to-midsize enterprise network cores.

• Manufacturer: Dell EMC (Dell Technologies)
• Product Family: Dell EMC PowerSwitch N-Series
• Product Series: N1100 Series
• Model: N1148P-ON
• Product Type: Layer 2 Managed Ethernet Switch, Stackable
• Ports: 48x 10/100/1000Base-T (24x PoE+) + 4x SFP+ 10GbE
• Switching Capacity: 176 Gbps (full duplex)
• Forwarding Rate: 132 Mpps (third-party listings); up to 164 Mpps per Dell N1100 series datasheet
• MAC Address Table: 16,000 entries
• VLANs Supported: 512
• Link Aggregation: 64 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG
• Queues per Port: 8
• ARP Entries: 2,048 (IPv4) / 512 (IPv6)
• NDP Entries: 400
• Max ACL Rules (system-wide): 4,000
• CPU Memory: 1GB
• Flash Memory: 1GB
• MTU: 9,216 bytes
• Operating System: Dell EMC Networking OS 6; supports ONIE for alternate NOS installation
• PoE: PoE+ (802.3at), 375W power budget
• Power Supply: 500W AC internal power supply
• Management: CLI, GUI, SNMP, RMON, Telnet, HTTP, TFTP, SSH-2
• Dimensions (H x W x D): 1.75 x 17 x 10 inches
• Weight: 9.19 lbs (4.17 kg)
• Operating Temperature: Up to 113°F (45°C)
• Storage Temperature: -40°F to 149°F (-40°C to 65°C)
• Warranty: Limited Lifetime Warranty; optional 3-year ProSupport NBD

• 48 Gigabit Ethernet ports with 24 PoE/PoE+ ports and 375W power budget
• 4 integrated 10GbE SFP+ ports for high-speed uplinks or stacking
• Stacking architecture supporting up to 4 units managed from a single IP
• Dell EMC Networking OS 6 for simplified deployment and management
• ONIE support for installation of alternate network operating systems
• Non-blocking, wire-speed Layer 2 switching architecture
• Interoperability with Cisco RPVST+ and CDP for mixed-vendor networks
• Energy-Efficient Ethernet (802.3az) and low-power PHYs for reduced power draw
• Variable-speed fan control for efficient thermal management
• Access Control Lists (MAC, IP-based, time-controlled) for traffic security
• IGMP v1/v2/v3 snooping and querier for multicast optimization
• Micro-USB console port with included Micro-USB to USB cable

Designed as a high-density access-layer switch for enterprise, campus, and branch networks requiring PoE-powered device support.

• Campus and branch office network access switching
• Powering PoE+ devices such as wireless access points and IP phones
• Video surveillance camera network deployments requiring PoE+
• High-availability stacking in wiring closets, IDFs, and MDFs
• Aggregating Gigabit endpoints with 10GbE uplinks to the core network
• Small-to-midsize business network core or distribution layer
• Mixed-vendor environments requiring Cisco RPVST+/CDP interoperability

• High-density 48-port Gigabit PoE+ connectivity
• Fast 10GbE SFP+ uplinks for network scalability
• Simplified management via unified CLI/GUI
• Reduced downtime with resilient stacking architecture
• Energy-efficient design lowers operating costs
• Lifetime warranty provides long-term investment protection

• Form Factor: 1U Rack-mountable
• Dimensions (H x W x D): 1.75 x 17 x 10 inches
• Weight: 9.19 lbs (4.17 kg)
• Cooling: Variable speed fan control (not fanless, unlike other N1100 models)

Per available documentation, this product is validated for:

• Stacking with other Dell EMC N1124T-ON, N1124P-ON, N1148T-ON, and N1148P-ON switches
• Dell EMC-branded SFP/SFP+ 1GbE and 10GbE transceiver modules
• Third-party MSA-compliant SFP+ transceivers compatible with Dell EMC switches
• Dell EMC ProSupport and ProDeploy Enterprise services
• Standard 19-inch rack cabinets via included rack mounting kit
• PoE-powered endpoint devices (IP phones, wireless access points, surveillance cameras)
• Networks using Cisco RPVST+ and Cisco Discovery Protocol (CDP) for interoperability

Note: Dell EMC Networking N1108EP-ON and N1500 Series switches do not stack with the N1148P-ON or other N1100 24/48-port models; stacking is limited to compatible N1124/N1148 series units.

• 1x Dell EMC PowerSwitch N1148P-ON Switch
• 1x Power cord
• Rack mounting kit (brackets, bolts, cage nuts)
• Micro-USB to USB console cable

Q: What product does Dell MPN 210-AJIV correspond to?

A: 210-AJIV is the Dell manufacturer part number for the Dell EMC PowerSwitch N1148P-ON, a 48-port Layer 2 managed Gigabit Ethernet switch in the N1100 Series.

Q: How many PoE ports does the N1148P-ON have?

A: It has 24 PoE/PoE+ ports out of its 48 total 10/100/1000Base-T ports, with a total PoE power budget of 375W.

Q: Does the switch support stacking?

A: Yes, the N1148P-ON supports stacking with other compatible N1100 24- and 48-port models (N1124T-ON, N1124P-ON, N1148T-ON, N1148P-ON), managed from a single IP address, though it does not stack with N1108EP-ON or N1500 Series switches.

Q: What operating system does this switch run?

A: It runs Dell EMC Networking OS 6, designed for easier deployment and interoperability, and supports the Open Network Install Environment (ONIE) for installing alternate network operating systems.

Q: What is the switching capacity of the N1148P-ON?

A: The switch offers a switching fabric bandwidth of up to 176 Gbps in full duplex, with forwarding rates cited between 132 Mpps and 164 Mpps depending on the source.

Q: What warranty does the N1148P-ON include?

A: Dell EMC N1100 Series switches, including the N1148P-ON, ship with a limited lifetime warranty covering software upgrades and hardware repair/replacement, with optional 3-year ProSupport NBD service available.

Q: What are the physical dimensions and weight of this switch?

A: According to the official Dell spec sheet, the N1148P-ON measures 1.75 x 17 x 10 inches and weighs approximately 9.19 lbs (4.17 kg).

Q: What is the maximum operating temperature for this switch?

A: The N1100 Series, including the N1148P-ON, is rated to operate at temperatures up to 113°F (45°C) to help reduce cooling costs.