210-ASNH - Dell PowerSwitch N1124T-ON 24-Port GbE Switch

Dell EMC PowerSwitch N1124T-ON: 24x 1GbE RJ-45 ports + 4x 10GbE SFP+ uplinks, Layer 2 managed, 1U rack-mountable switch for campus and SMB networks.

The Dell 210-ASNH is the manufacturer part number for the Dell EMC PowerSwitch N1124T-ON, a member of the N1100 Series of Layer 2 managed Gigabit Ethernet switches. It provides 24 fixed 10/100/1000Base-T RJ-45 ports for standard network connectivity plus 4 SFP+ ports supporting 1GbE/10GbE fiber uplinks, making it suitable for aggregating access-layer traffic in small-to-medium business and branch office environments. The switch runs Dell Networking OS 6, offering a familiar CLI and GUI, and supports the Open Network Install Environment (ONIE) for installing alternate network operating systems. It operates fanless for quiet, energy-efficient performance and is designed for high-density GbE deployments requiring reliable performance, VLAN segmentation, ACL-based security, and link aggregation. The N1124T-ON is a non-PoE model, distinguishing it from the PoE-enabled N1124P-ON variant in the same series, and is intended for environments where power delivery to endpoints is not required.

• Manufacturer: Dell EMC / Dell Technologies
• MPN: 210-ASNH
• Model: N1124T-ON
• Product Family: Dell PowerSwitch N-Series
• Product Series: N1100 Series
• Product Type: Layer 2 Managed Ethernet Switch
• RJ-45 Ports: 24 x 10/100/1000Base-T
• Uplink Ports: 4 x SFP+ (1GbE/10GbE)
• Switching Capacity: 128 Gbps
• Forwarding Rate: 96 Mpps
• MAC Address Table: 16,000 entries
• Packet Buffer Memory: 2MB
• CPU Memory: 1GB
• Flash Memory: 1GB
• VLANs Supported: 512
• ARP Entries: 2,048 (IPv4) / 512 (IPv6)
• Link Aggregation: 64 LAG groups, up to 8 member ports per LAG
• Queues per Port: 8
• Power Supply: Integrated 40W AC power supply (PSU model DPS-40AP)
• PoE Support: Not supported (non-PoE model; see N1124P-ON for PoE variant)
• Console Port: Micro USB console port (cable included)
• Operating System: Dell Networking OS 6; supports ONIE for alternate OS installation
• Operating Temperature: Up to 45°C (113°F)
• Dimensions (H x W x D): 1.75 x 17 x 10 inches
• Weight: 6.72 lbs (3.05 kg)
• Regulatory Model: E18W (RTN E18W001)
• Warranty: Limited Lifetime Warranty with Basic Hardware Service (select N-Series products)
• Certifications: EN55032 / EN55034 Class A

• 24 x 10/100/1000Base-T ports for standard Gigabit Ethernet connectivity
• 4 x SFP+ ports supporting 1GbE/10GbE fiber uplinks
• Layer 2 managed switching with advanced VLAN and ACL support
• Dell Networking OS 6 with unified CLI/GUI management experience
• ONIE support for installing alternate network operating systems
• Fanless operation for quiet, energy-efficient performance
• Interoperability with Cisco RPVST+ and CDP for mixed-vendor networks
• Energy-efficient Ethernet and low-power PHYs to reduce power on idle links
• Compact 1U rack-mountable chassis suitable for wiring closets or data centers
• Dual on-board firmware images for reliable upgrades
• Micro USB console port for local management access
• Supports stacking architecture for simplified multi-switch management

The Dell N1124T-ON is designed for access-layer aggregation in small-to-medium enterprise, branch, and campus network environments.

• Access-layer switching for small-to-medium business networks
• Branch office or remote site LAN aggregation
• Campus network edge connectivity with fiber uplink to core switches
• VLAN segmentation for departmental or guest network isolation
• High-speed 10GbE uplinks to core or distribution switches
• Layer 2 managed switching for VoIP or basic network security policies
• Replacing legacy unmanaged switches with manageable, ACL-capable infrastructure

• 24 GbE ports plus 4 SFP+ for flexible uplinks
• Fanless design reduces noise and power draw
• ONIE support enables OS flexibility
• Simplified management via familiar CLI/GUI
• Compact 1U design saves rack space
• Broad interoperability with mixed-vendor networks

• Form Factor: 1U rack-mountable
• Dimensions (H x W x D): 1.75 x 17 x 10 inches
• Weight: 6.72 lbs (3.05 kg)
• Cooling: Fanless operation

Per available documentation, this product is validated for use with the following Dell N-Series ecosystem components:

• Dell EMC N1100 Series switches (N1108T-ON, N1108P-ON, N1108EP-ON, N1148T-ON, N1148P-ON)
• Dell Networking OS 6 management ecosystem
• SFP+ optical/copper transceiver modules (1GbE/10GbE)
• Dell rack mounting kit with L-brackets and cage nuts
• 1RU tandem tray for mounting two half-width N1100 switches side by side
• Cisco-interoperable environments via RPVST+ and CDP support
• ONIE-compatible alternate network operating systems

Note: PoE-related accessories and power budgets apply only to the PoE variants (N1124P-ON, N1148P-ON) within the series; the N1124T-ON is a non-PoE model.

• Dell PowerSwitch N1124T-ON switch unit
• Power cord
• Rack mounting brackets and cage nuts
• Micro USB to USB console cable

Q: What does the Dell MPN 210-ASNH correspond to?

A: 210-ASNH is the Dell manufacturer part number for the PowerSwitch N1124T-ON, a 24-port Layer 2 managed Gigabit Ethernet switch with 4 SFP+ uplink ports.

Q: Does the N1124T-ON support Power over Ethernet (PoE)?

A: No. The N1124T-ON is a non-PoE model. Dell offers a separate PoE variant, the N1124P-ON, for customers needing power delivery to endpoints.

Q: What is the switching capacity of the N1124T-ON?

A: According to distributor specification listings, the N1124T-ON provides a switching capacity of 128 Gbps and a forwarding rate of 96 Mpps.

Q: Can the N1124T-ON run non-Dell network operating systems?

A: Yes. The switch supports the Open Network Install Environment (ONIE), which allows installation of alternate network operating systems beyond Dell Networking OS 6.

Q: What is the power supply configuration for this switch?

A: The N1124T-ON uses an integrated 40W AC power supply, identified in Dell's regulatory documentation with PSU model DPS-40AP.

Q: What are the physical dimensions and weight of the switch?

A: The N1124T-ON measures approximately 1.75 x 17 x 10 inches and weighs about 6.72 lbs (3.05 kg), per Dell's official specification sheet.

Q: Is the N1124T-ON fanless?

A: Yes, the N1124T-ON operates fanless, along with the N1108T-ON and N1148T-ON models, for quieter and more energy-efficient operation.

Q: What warranty applies to the Dell N1124T-ON?

A: Select Dell N-Series networking products, including this model, carry a Lifetime Limited Warranty with Basic Hardware Service, which covers repair or replacement but excludes advanced troubleshooting or configuration support.