5C1J6 - Dell EMC N2128PX-ON 28-Port Layer 3 PoE+ Switch

Dell EMC Networking N2128PX-ON managed Layer 3 switch: 24 PoE+ GbE ports, 4 multi-gig PoE ports, 2x 10GbE SFP+ uplinks for power-efficient network edge deployments.

The Dell EMC Networking N2128PX-ON (Dell part number 5C1J6) is a Layer 3 managed Gigabit Ethernet switch from the Dell EMC PowerSwitch N2000 Series. It is designed as a power-efficient network-access switch with integrated 10GbE uplinks, intended for enterprise wiring closets and network edge deployments that require high-density PoE. The switch provides 24 auto-sensing 10/100/1000 PoE+ ports, four multi-gigabit (100/1000/2.5G/5G) PoE ports, and two 10 Gigabit SFP+ uplink ports, plus two dedicated stacking ports. It runs Dell EMC Networking OS6, offering a familiar command-line interface, Layer 2/3 switching, VLAN support, ACLs, and stacking of up to 12 switches from a single management IP. Its non-blocking architecture, wire-speed switching, and integrated 1000W power supply make it suitable for connecting Wi-Fi 6/6E access points, IP cameras, and other bandwidth- and power-intensive endpoints.

• 24 auto-sensing 10/100/1000 PoE+ RJ45 ports
• 4 multi-gigabit (100Mbps/1G/2.5G/5G) PoE ports for Wi-Fi 6/6E APs
• 2 fixed 10 Gigabit SFP+ uplink ports
• 192 Gbps non-blocking switch fabric capacity
• 256 Mpps wire-speed forwarding rate
• Layer 3 routing with static and dynamic routing support
• Stacking of up to 12 units managed from a single IP address
• Dell EMC Networking OS6 with familiar CLI for fast administration
• USB auto-configuration for rapid mass deployment
• VLAN, ACL, and QoS support for traffic segmentation and prioritization
• Interoperability features including RPVST+ and CDP support for multivendor networks
• Energy-efficient 80PLUS-certified integrated power supply

Designed for enterprise network-edge access layer deployments requiring high-density PoE and multi-gigabit uplinks.

• Powering and connecting Wi-Fi 6/6E wireless access points at the network edge
• Video surveillance deployments using PoE-powered IP cameras
• Enterprise wiring closet access switching for offices and campuses
• Education and library network infrastructure requiring managed switching
• VoIP phone deployments using PoE+ ports
• Data center or server room aggregation with 10GbE SFP+ uplinks
• Multi-switch stacked deployments for scalable branch or campus networks

• High-density PoE+ for wireless and IoT devices
• Multi-gig ports future-proof network edge
• Non-blocking architecture for reliable throughput
• Simplified management via 12-unit stacking
• Energy-efficient PSU reduces operating costs
• Layer 3 routing adds network segmentation flexibility

• Form Factor: 1U rack-mountable
• Dimensions (H x W x D): 1.7 x 17.3 x 15.2 in (43.5 x 440 x 387 mm)
• Weight: 15.05 lbs / 6.8 kg
• Airflow: Front-to-back airflow

Per available Dell EMC documentation, this switch is validated for use and stacking with the following:

• Dell EMC Networking N2000 Series switches (N2024, N2024P, N2048, N2048P) for mixed stacking
• Dell EMC Networking OS6 firmware images (version 6.5.x, 6.6.x, 6.7.x)
• MPS1000 external redundant power supply for N2000 PoE+ switches
• Standard SFP+ optical and copper transceivers
• Rack mounting kit with brackets, bolts, and cage nuts
• USB storage devices for configuration auto-deployment
• Cisco RPVST+ and CDP-enabled multivendor network devices

Note: Mixed stacking with N2000 Series switches requires a matching firmware image version and is not supported on all OS6 releases (e.g., unsupported in OS 6.7.1.21).

• Dell EMC Networking N2128PX-ON switch
• Power cord (C15 plug compatible)
• Rack mounting kit with brackets and cage nuts
• Quick start / getting started guide

Q: What is Dell part number 5C1J6?

A: 5C1J6 is the Dell manufacturer part number for the Dell EMC Networking N2128PX-ON, a 28-port Layer 3 managed Gigabit Ethernet switch from the N2000 Series.

Q: How many ports does the N2128PX-ON have?

A: It has 24 auto-sensing 10/100/1000 PoE+ ports, 4 multi-gigabit (100Mbps–5G) PoE ports, and 2 fixed 10GbE SFP+ uplink ports, for 28 total data ports plus 2 stacking ports.

Q: What is the switching capacity and forwarding rate of this switch?

A: According to Dell's official product specifications, the N2128PX-ON delivers a 192 Gbps full-duplex switching fabric capacity and a 256 Mpps forwarding rate.

Q: Can the N2128PX-ON be stacked with other Dell switches?

A: Yes, it supports stacking of up to 12 units and can mixed-stack with other N2000 Series switches, provided a compatible OS6 firmware image is used on all units.

Q: What operating system does the switch run?

A: The switch runs Dell EMC Networking OS6, which provides a common CLI and GUI across the N-Series switch portfolio.

Q: What is the power supply configuration of the N2128PX-ON?

A: It includes an integrated 1000W internal power supply with a C15 plug and 80%+ efficiency, supporting its PoE+ and multi-gig PoE ports.

Q: What are the operating environmental limits for this switch?

A: Per Dell documentation, the switch operates between 0°C and 45°C with up to 95% humidity, and can be stored between -40°C and 65°C.

Q: Is the N2128PX-ON suitable for powering wireless access points?

A: Yes, its multi-gigabit PoE ports (100Mbps to 5Gbps) are specifically suited for powering high-performance Wi-Fi 6/6E access points and other bandwidth-intensive PoE devices.