FTLX1671D3BTL - Finisar 10Gbps 10GBase-ER Single-mode Fiber 40km 1550nm Duplex LC Connector SFP+ Transceiver Module

About Finisar FTLX1671D3BTL, 10300 Mbit/s, SFP+, LC, 40000 m, 1550 nm, IEEE 802.3ae

Finisar FTLX1671D3BTL. Maximum data transfer rate: 10300 Mbit/s, Interface type: SFP+, Fiber optic connector: LC. Input voltage: 3.3 V, Power consumption (typical): 1 W. Width: 11 mm, Depth: 56.5 mm, Height: 8.5 mm

Finisar's FTLX1671D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW. The FTLX1671D3BTL incorporates advanced CMLTM technology, and is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

- Hot-pluggable SFP+ footprint
- Supports 9.95 to 10.3Gb/s bit rates
- Power dissipation < 1.5W; Typical <1W
- RoHS-6 compliant (lead-free)
- Industrial temperature range -40°C to 85°C
- Single 3.3V power supply
- Maximum link length of 40km
- 1550nm cooled CMLTM technology
- Receiver limiting electrical interface
- Duplex LC connector
- Built-in digital diagnostic functions