SSDSC2BA200G3 - Intel DC S3700 200GB SATA 6Gb/s 2D NAND MLC (AES-256) 2.5-inch Solid State Drive (SSD)

About Intel SSDSC2BA200G3, 200 GB, 2.5", 500 MB/s, 6 Gbit/s

Intel SSDSC2BA200G3. SSD capacity: 200 GB, SSD form factor: 2.5", Read speed: 500 MB/s, Write speed: 365 MB/s, Data transfer rate: 6 Gbit/s

Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.

High Endurance Technology (HET) in SSD's combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime.

Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.