00D9550 - Lenovo ConnectX-3 2-Ports FDR 40GbE QSFP+ VPI Infiniband Network Adapter

Lenovo 00D9550 network card Internal Fiber 40000 Mbit/s

Mellanox ConnectX-3 40GbE / FDR IB VPI

• Low-profile form factor adapter with 2U bracket (3U bracket available for CTO orders)
• PCI Express 3.0 x8 host-interface (PCIe 2.0 and 1.1 compatible)
• SR-IOV support; 16 virtual functions supported by KVM and Hyper-V (OS dependant) up to a maximum of 127 virtual functions supported by the adapter
• Enables Low Latency RDMA over Ethernet (supported with both non-virtualized and SR-IOV enabled virtualized servers) -- latency as low as 1 µs
• TCP/UDP/IP stateless offload in hardware
• Traffic steering across multiple cores
• Intelligent interrupt coalescence
• Industry-leading throughput and latency performance
• Software compatible with standard TCP/UDP/IP stacks
• Microsoft VMQ / VMware NetQueue support
• Legacy and UEFI PXE network boot support
• Supports iSCSI as a software iSCSI initiator in NIC mode with NIC driver
• The Mellanox ConnectX-3 40GbE / FDR IB VPI Adapter has the following features:
• Two QSFP ports supporting FDR-14 InfiniBand or 40 Gb Ethernet
• Support for InfiniBand FDR speeds of up to 56 Gbps (auto-negotiation FDR-10, DDR and SDR)
• Support for Virtual Protocol Interconnect (VPI), which enables one adapter for both InfiniBand and 10/40 Gb Ethernet. Supports three configurations:
• 2 ports InfiniBand
• 2 ports Ethernet
• 1 port InfiniBand and 1 port Ethernet
• Enables Low Latency RDMA over 40Gb Ethernet (supported with both non-virtualized and SR-IOV enabled virtualed servers) -- latency as low as 1 µs
• Sub 1 µs InfiniBand MPI ping latency
• Support for QSFP to SFP+ for 10 GbE support
• Legacy and UEFI PXE network boot support (Ethernet mode only)
• Mellanox ConnectX-3 40GbE / FDR IB VPI
• Wired
• PCI Express Fiber
• 40000 Mbit/s
• Internal

Documents

• 

  00D9550-brochure-datasheet