8D147S0 - Maxtor Atlas 147.10GB 3.5 Internal Hard Drive - 3Gb/s SAS - 10000 rpm - 16 MB Buffer

About Maxtor Atlas 10K 147GB, 147.1 GB, 10000 RPM

Maxtor Atlas 10K 147GB. HDD capacity: 147.1 GB, HDD speed: 10000 RPM

Capacity, Availability, Scalability, Flexibility, Reliability, Adaptability
and Performance – The Atlas 10K V SAS Advantage
The Maxtor® Atlas 10K V SAS delivers the industry’s highest capacity
point Serial Attached SCSI (SAS) drive with a 16MB cache, as fast as 4.0
msec seek time and 89MB/sec sustained data transfer rate, providing an
optimal combination for use on mainstream enterprise solutions

SAS technology brings together the best
features of other Enterprise interfaces to
deliver:
Higher System Availability
• Dual port provides two data paths to
each disk drive increasing the drive’s
availability
• Multi-initiator capability enables multiple
hosts to access a drive simultaneously
• Point-to-point connectivity for better fault
isolation
Scalability
• More than 16,000 devices per SAS
domain
• Scalable bandwidth via wide ports, i.e.
up to 24 Gb/s peak bandwidth with 4
SAS links configured as a wide port with
full duplex
End User Flexibility
• Configuration flexibility allow end-users
to mix and match SAS and SATA drives
to fit their specific application
• SAS back-planes can accommodate dual
port / high performance SAS drives
and/or high capacity / lower cost SATA
drives
Performance
• Up to 128 queue depth support for
improved IOPS performance
• Full duplex capability allow drives to send
and receive data for two different IO operations
simultaneously
• Point-to-point connectivity eliminates the
bottleneck inherent with a shared/arbitrated
bus
• Scalable bandwidth via wide ports
• Rate matching supports 1.5Gbs SATA
and 3.0Gbs SAS drives for optimal
performance

SCSI Investment Protection
• Employs the SCSI command set to maintain
compatibility with existing SCSI infrastructures
Atlas 10K V SAS Hard Drives Deliver:
MaxAdapt Features
• Adaptive Bias Estimation (ABE)—
Maintains consistent performance by
adjusting the bias applied to the actuator
• Virtual Cache Lines (VCL)—Allows dynamic
assignment of cache segments
• Rotational Vibration Compensation
(RVC)—Monitors and corrects for
external vibration
Reliability
• 1,400,000 hours MTTF
• State-of-the-art manufacturing processes
• Multiple temperature tests
• Improved SMART and self-diagnostics
Atlas 10K V SAS Best-Fit:
• Large Enterprise NAS/SAN Servers
• Mainstream NAS/SAN
• Workstations
• Direct Attached JBOD Storage
• Direct Attached RAID Storage