MZ7KM1T9HMJP-00005 - Samsung SM863a 1.92TB SATA 6Gb/s 3D NAND MLC (AES-256 / PLP) 2.5-inch Solid State Drive (SSD)

About Samsung SM863a, 1.92 TB, 2.5", 510 MB/s, 6 Gbit/s

Samsung SM863a. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 510 MB/s, Write speed: 485 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation

Samsung Enterprise Solid State Drives (SSDs) are being used increasingly as data storage media in computing, communication, and multimedia devices. Most SSDs use NAND Flash memory as the storage media, which is capable of retaining data without an external power supply. A typical SSD consists of two main components: the data storage device and a controller for the storage device that acts as an interface between the SSD and the host system. The SSD controller manages the interfaces from both the host side and the device side, which includes mapping bad data blocks, caching read/write data, and error checking and correction (ECC); and the controller's built-in ROM contains the firmware needed to control the drive. An SSD is an example of an embedded system, and needs a Real-Time OS (RTOS) for its operation. Several open source and proprietary firmware solutions are available for SSD controllers

The primary advantage of using Samsung SSDs is their lack of moving parts, resulting in extremely short startup and shutdown/standby times. SSDs offer superior reliability compared to traditional Hard Disk Drives (HDDs). Advances in semiconductor flash memory technologies have enabled the development of SSDs that are equal in capacities to HDDs and can be used as direct replacements. SSDs also prove to be highly cost effective in-use due to their much lower power consumption and maintenance costs. As the world leader in semiconductor memory technology, Samsung offers a comprehensive range of SSDs for deployment in a wide range of devices across every industry segment.