JM1600KLN-8GK - Transcend JetRam 8GB Kit (2 X 4GB) DDR3-1600MHz PC3-12800 non-ECC Unbuffered CL11 240-Pin DIMM Memory

About Transcend JetRam 8GB DDR3 1600MHz, 8 GB, 2 x 4 GB, DDR3, 1600 MHz, 240-pin DIMM

Transcend JetRam 8GB DDR3 1600MHz. Internal memory: 8 GB, Memory layout (modules x size): 2 x 4 GB, Internal memory type: DDR3, Memory clock speed: 1600 MHz, Memory form factor: 240-pin DIMM, CAS latency: 11

The TX1600KLU-4GK consists of 2pcs 2GB DDR3 SDRAM modules. The 2GB module is a 128M x 64bits DDR3-1600 Unbuffered DIMM. The 2GB module consists of 16pcs 128Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The TX1600KLU-4GK is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

- RoHS compliant products.
- Tested at SPD settings (8-8-8-24) at 1.6V at 1600MHz
- SPD programmed at: JEDEC standard (9-9-9-24) at 1.5V at 1333MHz, XMP support (8-8-8-24) at 1.6V at 1600MHz
- Max clock Freq: 800MHZ; 1600Mb/S/Pin.
- VDDQ=1.5V ± 0.075V
- Programmable CAS Latency: 8
- 8 bit pre-fetch
- Burst Length: 4, 8
- Bi-directional Differential Data-Strobe
- Internal calibration through ZQ pin