JM366D643A-60 - Transcend JetRam 512MB DDR-333MHz PC2700 non-ECC Unbuffered CL2.5 184-Pin DIMM Memory Module

About Transcend 512MB, DDR, DIMM,333MHz, CL2, JetRam, 32Mx8, 0.5 GB, DRAM, 333 MHz, 184-pin DIMM

Transcend 512MB, DDR, DIMM,333MHz, CL2, JetRam, 32Mx8. Internal memory: 0.5 GB, Internal memory type: DRAM, Memory clock speed: 333 MHz, Memory form factor: 184-pin DIMM, CAS latency: 2.5

The JM366D643A-60 is a 64M x 64bits Double Data Rate SDRAM high density for DDR333. The JM366D643A-60 consists of 16pcs CMOS 32Mx8 bits Double Data Rate SDRAMs in 66 pin TSOP-II 400mil packages and a 2048 bits serial EEPROM on a 184-pin printed circuit board. The JM366D643A-60 is a Dual In-Line Memory Module and is intended for mounting into 184-pin edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

Features:
-Power supply: VDD: 2.5V ± 0.2V, VDDQ: 2.5V ±
0.2V
-Max clock Freq: 166MHZ.
-Double-data-rate architecture; two data transfers per clock cycle
-Differential clock inputs (CK and /CK)
-Burst Mode Operation.
-Auto and Self Refresh.
-Data I/O transactions on both edge of data strobe.
-Edge aligned data output, center aligned data
input.
-Serial Presence Detect (SPD) with serial EEPROM
-SSTL-2 compatible inputs and outputs.
-MRS cycle with address key programs.
-CAS Latency (Access from column address): 2.5
-Burst Length (2,4,8 )
-Data Sequence (Sequential & Interleave)