9RNP1 - Dell EMC Networking S6010-ON 32-Port 40GbE Switch

Dell EMC S6010-ON 1U ToR switch with 32 QSFP+ ports supporting 10/40GbE, 2.56Tbps switching capacity, L2/L3 routing, and Open Networking (ONIE) support.

The Dell EMC Networking S6010-ON (MPN: 9RNP1) is a 1U high-density top-of-rack (ToR) network switch built for data center and enterprise environments. It provides 32 fixed ports that can operate as 40 Gigabit Ethernet (QSFP+) connections, or be broken out to support up to 96 ports of 10GbE plus eight ports of 40GbE. As part of Dell's Open Networking portfolio, the S6010-ON runs Dell EMC Networking OS (FTOS) and ships without a pre-installed OS in some configurations, allowing flexibility for open networking operating systems. It delivers up to 2.56 Tbps of non-blocking, cut-through switching fabric with sub-600ns latency, and supports advanced Layer 2/Layer 3 features including VLT, mVLT, VXLAN gateway functionality, OSPF, and BGP routing. It is designed for converged LAN/SAN traffic, virtualization, and cloud-scale ToR deployments where high throughput and low latency are critical.

• Manufacturer: Dell EMC
• Product Family: Dell EMC Networking S-Series
• Model: S6010-ON
• MPN: 9RNP1
• Product Type: Layer 2/3 Managed Ethernet Switch (Open Networking ToR)
• Ports: 32 x 40GbE QSFP+ fixed ports (configurable as 96x10GbE + 8x40GbE)
• Switching Capacity: Up to 2.56 Tbps full-duplex switching I/O bandwidth
• Forwarding Rate: Approx. 1.92 Bpps (billion packets per second), reported as ~1462 Mpps by some resellers
• Latency: Sub-600ns cut-through switching latency
• MAC Address Table Size: 160,000 entries (per third-party listing)
• Management Ports: 1x RJ45 console/management port (RS232), 1x USB 2.0 Type A, 1x USB 2.0 Type B console
• Operating System: Dell EMC Networking OS (FTOS) / Open Networking (ONIE) capable
• Routing Protocols: OSPF, BGP, IPv4 VRF, IPv6
• Switching Features: VLT, mVLT (Multi-chassis Link Aggregation), VXLAN gateway, QoS
• Power Supply: 2 x redundant, hot-swappable AC PSUs (100–240 VAC, 50/60Hz)
• Max Power Consumption: Approx. 411 Watts (max), 274 Watts (typical)
• Dimensions: 1RU, approximately 1.71 x 17.08 x 18.11 inches
• Weight: Approximately 16.12 lbs (7.32 kg)
• Operating Temperature: 32°F to 113°F (0°C to 45°C)
• Storage Temperature: -40°F to 158°F (-40°C to 70°C)
• Operating Humidity: 10% to 90% RH, non-condensing
• Airflow: Standard I/O to PSU airflow (front-to-back option also available)
• Certifications: UL/CSA 60950-1, EN 60950-1, IEC 60950-1, FCC Part 15 Class A, CISPR 22 Class A, EN 55022
• Mounting: Dell tool-less ReadyRails mounting kit
• Rail Kit and Cables: Included per reseller listings

• 32 line-rate 40GbE QSFP+ ports with flexible 10GbE breakout configuration
• Up to 2.56 Tbps non-blocking switching fabric with cut-through architecture
• Sub-600ns latency for demanding, low-latency workloads
• Scalable Layer 2 and Layer 3 Ethernet switching with QoS support
• IPv4 VRF and IPv6 support including OSPF and BGP routing
• Virtual Link Trunking (VLT) and mVLT for multi-chassis link aggregation
• VXLAN gateway functionality bridging virtual and physical overlay networks
• Open Automation Framework for automated provisioning and configuration
• Modular Dell EMC Networking OS (FTOS) for stability and serviceability
• Redundant, hot-swappable AC power supplies for high availability
• Tool-less ReadyRails mounting kit for fast rack installation
• Supports jumbo frames and converged DCB (Data Center Bridging) with PFC, ETS, DCBx

Designed for high-density, low-latency top-of-rack switching in modern data centers.

• Top-of-rack (ToR) switching for data center server racks
• High-performance computing (HPC) and cloud computing fabric interconnects
• Storage networking convergence using RoCE and DCB
• Virtualized data center overlay networking with VXLAN
• Enterprise core/aggregation layer for 10/40GbE environments
• Software-defined data center (SDDC) network fabrics
• Multi-chassis link aggregation for resilient network designs

• High-density 40GbE port count in compact 1U form
• Low sub-600ns latency for performance-critical apps
• Redundant power for maximum uptime reliability
• Flexible 10/40GbE port configuration options
• Advanced L2/L3 routing and VXLAN support
• Open Networking flexibility for OS choice

• Form Factor: 1U rack-mountable
• Dimensions: Approx. 1.71 x 17.08 x 18.11 inches
• Weight: Approx. 16.12 lbs (7.32 kg)
• Airflow Direction: I/O panel to PSU (standard) or PSU to I/O (reverse airflow variant available)

Per available manufacturer and distributor documentation, this switch is validated for use with:

• QSFP+ 40GbE transceivers (LM4, SM4, SR4 variants)
• QSFP+ to SFP/SFP+ adapters (QSA) for 1GbE/10GbE connectivity
• 40GbE QSFP+ to QSFP+ Active Optical Cables (10m and 40m reach)
• 40GbE QSFP+ MTP to 4x10GbE SFP+ Active Optical Breakout Cables
• 40GbE QSFP+ to 4x10GbE SFP+ Passive Copper Breakout Cables
• MTP to MTP OM3/OM4 fiber cabling
• Dell EMC Networking OS (FTOS) and compatible Open Networking OS images
• Dell ReadyRails rack mounting systems

Note: Optics, breakout cables, and rail kits are typically sold separately unless explicitly bundled by the reseller.

• Dell EMC Networking S6010-ON switch unit
• 2 x redundant AC power supplies (per configuration)
• Rail kit (per some reseller listings)
• Basic documentation/quick start reference (varies by seller; full manuals available online)

Q: What product does MPN 9RNP1 correspond to?

A: 9RNP1 is the Dell Manufacturer Part Number for the Dell EMC Networking S6010-ON, a 32-port 40GbE QSFP+ Layer 2/3 top-of-rack switch, as confirmed by Dell's official spec sheet and multiple authorized resellers.

Q: How many ports does the S6010-ON (9RNP1) have?

A: It features 32 fixed 40GbE QSFP+ ports, which can also be configured to support up to 96 ports of 10GbE plus eight ports of 40GbE via breakout cabling.

Q: What is the switching capacity of this switch?

A: The switch delivers switching I/O bandwidth of up to 2.56 Tbps in full-duplex mode using a non-blocking, cut-through switching fabric.

Q: Does the S6010-ON support advanced routing protocols?

A: Yes, it offers scalable L2 and L3 Ethernet switching with QoS, IPv4 VRF, and IPv6 support, including OSPF and BGP routing.

Q: What operating system does this switch run?

A: It runs the modular Dell EMC Networking OS (FTOS) and is part of Dell's Open Networking (ON) product line, supporting ONIE for alternative network OS deployment.

Q: What is the power configuration of the S6010-ON?

A: The switch uses two redundant, hot-swappable AC power supplies rated 100–240 VAC, with a maximum power consumption of approximately 411 watts.

Q: What is the rack form factor and weight of this switch?

A: It is a 1U rack-mountable unit measuring approximately 1.71 x 17.08 x 18.11 inches and weighing about 16.12 lbs (7.32 kg).

Q: Is this switch suitable for virtualization and storage convergence?

A: Yes, it supports VXLAN gateway functionality, converged DCB with Priority Flow Control, and RoCE, making it suitable for virtualized and storage-converged data center environments.