WDCPN - Dell EMC S6010-ON 32-Port 40GbE QSFP+ Switch

Dell EMC Networking S6010-ON, Dell part WDCPN: 1U ToR switch with 32x 40GbE QSFP+ ports, 2.56Tbps switching capacity, L2/L3 support.

The Dell part number WDCPN corresponds to the Dell EMC Networking S6010-ON, a compact 1U top-of-rack (ToR) switch purpose-built for high-performance data center and computing environments. It delivers industry-leading port density with 32 ports of 40GbE QSFP+, or alternatively up to 96 ports of 10GbE plus eight ports of 40GbE, enabling flexible network configurations. Built on a non-blocking, cut-through switching architecture, the S6010-ON provides line-rate Layer 2 and Layer 3 forwarding with up to 2.56Tbps of full-duplex switching bandwidth and sub-600 nanosecond latency. As part of Dell's Open Networking (ON) portfolio, it supports ONIE for zero-touch installation of alternate network operating systems, along with VLT/mVLT multi-chassis link aggregation and VXLAN gateway functionality, making it suitable for data center spine/leaf, aggregation, and server-facing deployments.

• Manufacturer: Dell EMC
• Dell Part Number: WDCPN (alternative: 210-AGMN)
• Product Family: Dell EMC Networking S-Series
• Model: S6010-ON
• Product Type: Top-of-Rack (ToR) Layer 2/3 Network Switch
• Ports: 32x 40GbE QSFP+ (or up to 96x 10GbE + 8x 40GbE)
• Management Ports: 1x RJ45 console/management (RS232), 1x USB 2.0 Type A, 1x USB 2.0 Type B console
• Switch Fabric Capacity: 2.56 Tbps (full-duplex)
• Forwarding Capacity: 1462 Mpps
• Latency: Sub-600 nanoseconds under full load
• MAC Address Table: 160,000 entries
• ARP Table: 128K
• IPv4 Routes: 128K
• IPv6 Hosts: 24K
• IPv6 Routes: 8K
• Multicast Hosts: 8K
• Operating System: Dell EMC Networking OS9 (also supports OS10/SmartFabric OS10 and ONIE-based alternate NOS)
• Power Supply: 2 x redundant, hot-swappable AC PSUs, 100-240 VAC 50/60 Hz
• Max Power Consumption: 411 Watts
• Typical Power Consumption: 274 Watts
• PoE: Not supported
• Dimensions: 1 RU, 1.71 x 17.08 x 18.11 inches
• Weight: 16.12 lbs (7.32 kg)
• Operating Temperature: 0°C to 45°C (32°F to 113°F)
• Operating Humidity: 10 to 90% RH, non-condensing
• Storage Temperature: -40°C to 70°C (-40°F to 158°F)
• Airflow: Front-to-back (I/O panel to PSU) or reverse airflow variants available
• Rack Mounting: Tool-less ReadyRails mounting kit
• Key Protocols: OSPF, BGP, VRF, IPv4/IPv6, VLT/mVLT, VXLAN gateway, RoCE

• 32 line-rate 40GbE QSFP+ ports in a compact 1U form factor
• Flexible port configuration: 32x40GbE or up to 96x10GbE plus 8x40GbE
• Up to 2.56 Tbps non-blocking, cut-through switching fabric
• Sub-600 nanosecond latency under full load for high-performance workloads
• Scalable Layer 2 and Layer 3 Ethernet switching with QoS
• Support for VRF, OSPF, and BGP routing protocols
• VLT and multi-VLT (mVLT) multi-chassis link aggregation
• VXLAN gateway functionality bridging virtualized and non-virtualized networks
• RoCE support for converged compute and storage traffic
• Open Networking Install Environment (ONIE) for flexible OS choice
• Redundant, hot-swappable power supplies and fan modules
• Fastboot feature for minimal-loss software upgrades on standalone switches

Designed for high-density, high-performance data center networking and server aggregation.

• High-density 10/40GbE top-of-rack server aggregation in data centers
• Spine or leaf switch role in leaf-spine data center fabric architectures
• Data center core migration path from 10GbE to 40GbE
• Storage and compute convergence using RoCE-enabled fabrics
• VXLAN gateway deployment bridging virtualized overlay and physical networks
• High-performance computing (HPC) and cloud computing network backbones
• Disaggregated networking deployments using open network operating systems

• High port density in compact 1U footprint
• Ultra-low latency for demanding workloads
• Flexible OS choice via ONIE support
• Redundant power and cooling for uptime
• Scalable L2/L3 routing feature set
• Energy-efficient operation up to 45°C

• Form Factor: 1 Rack Unit (1RU)
• Dimensions: 1.71 x 17.08 x 18.11 inches
• Weight: 16.12 lbs (7.32 kg)
• Airflow Direction: I/O panel to PSU or PSU to I/O panel (model-dependent)

Per available documentation, this product is validated for use with:

• Dell EMC Networking OS9 (FTOS) software
• Dell EMC SmartFabric OS10 network operating system
• QSFP+ 40GbE transceivers (LM4, SM4 duplex variants)
• QSFP+ to SFP/SFP+ adapters (QSA) for 1GbE/10GbE connectivity
• 40GbE QSFP+ to QSFP+ Active Optical Cables
• 40GbE QSFP+ MTP to 4x10GbE SFP+ breakout cables
• MTP to MTP OM3/OM4 fiber cabling
• Dell EMC VLT domain pairing with compatible S-Series switches (e.g., S4048T-ON)
• ReadyRails tool-less rack mounting kits

Note: VXLAN L2/L3 routing (RIOT) support is confirmed for the S6010-ON alongside select other S-Series platforms; some newer OS10 releases (10.6.0.0+) have dropped support for certain older hardware platforms, so firmware compatibility should be verified before upgrading.

• Dell EMC Networking S6010-ON switch unit
• Redundant hot-swappable AC power supply units
• Hot-swappable fan modules
• ReadyRails rack mounting kit (tool-less)

Q: What product does the Dell MPN WDCPN correspond to?

A: WDCPN is the Dell part number for the Dell EMC Networking S6010-ON, a 32-port 40GbE QSFP+ top-of-rack switch, as confirmed by reseller listings referencing this exact part number.

Q: How many ports does the Dell S6010-ON (WDCPN) provide?

A: It provides 32 line-rate 40GbE QSFP+ ports, which can alternatively be configured as up to 96 ports of 10GbE plus 8 ports of 40GbE.

Q: What is the switching capacity of this switch?

A: According to Dell's official spec sheet and reseller documentation, the S6010-ON offers up to 2.56 Tbps of full-duplex switching I/O bandwidth with a non-blocking, cut-through architecture.

Q: Does the S6010-ON support Power over Ethernet (PoE)?

A: No, according to distributor specification listings, the switch is not PoE-enabled, as it is designed for high-speed data center switching rather than PoE endpoint powering.

Q: What network operating systems can run on this switch?

A: The S6010-ON ships with Dell EMC Networking OS9 and also supports Dell EMC SmartFabric OS10, plus alternate operating systems installable via ONIE, based on official Dell documentation.

Q: What is the typical power consumption of the S6010-ON?

A: Per the official Dell spec sheet, typical power consumption is 274 Watts, with a maximum power consumption of 411 Watts.

Q: Does the S6010-ON support VXLAN and VLT?

A: Yes, Dell's official SmartFabric OS10 documentation confirms the S6010-ON supports both asymmetric and symmetric IRB VXLAN routing, as well as VLT and multi-VLT multi-chassis link aggregation.

Q: What is the physical size and weight of the switch?

A: Third-party distributor specifications list the unit as a 1RU device measuring 1.71 x 17.08 x 18.11 inches and weighing 16.12 lbs (7.32 kg).